Multibrand diagnostics by TEXA

Today the diagnostics tool is an essential piece of equipment for every vehicle workshop. Whatever the fault, it is likely that during each repair process the ECUs will need to be accessed to clear the fault codes or configure the replacement components, operations that are only possible using a diagnostic tool.

Now even scheduled service and maintenance in many cases requires the use of diagnostic equipment, to reset the service lights and check or activate the various systems.

Wireless Diagnosis of Car, Truck, Bike and Agri.

The Navigator TXTs are excellent diagnostic interfaces that communicate wirelessly to a range of Texa display units, including Axone 4 & Axone 4 Mini. The Bluetooth technology enables the TXT to communicate without cables.

The Navigator TXT can communicate with multi brand vehicle electronic control units to enable diagnostic interrogation of the system.

The development of the interface has been focused on reducing the communication time, and thanks to the 64 MB memory the device can save all the communication programs previously used and retrieve it from the internal memory, reducing the communication time by over 70%.

Also the automatic internal switching enables the device to communicate with all makes of vehicles without cables or adapters.

IDC5 Software – Full Speed ​​Ahead

IDC5 is the latest generation of TEXA's renowned operating system and another step forward to assist technicians. Thanks to major improvements in code, the new system is faster than ever and guarantees virtually instant communication with a vehicle's control units.

The graphic interface of IDC5 is designed to resemble the latest consumer applications, simplifying and making the various steps in maintenance and repair procedures more intuitive.

The new “Interactive Wiring Diagrams” function lets you consult wiring diagrams using animations of a system's devices and an interactive map generated to show signal flows to and from the control units. Another new function allows you to view and manage vehicle parameters.

These can be displayed in graphic form and can be filtered using text searches or by selecting those specifically required. Even the downloading of updates is faster in the new software.

PASS THRU

Navigator TXTs is compatible with the PASS-THRU protocol, which allows any workshop to connect to each manufacturer's central server and download software packages or official technical information. The PASS-THRU function can be used whenever needing to update the software on one or more electronic control units, in the event of malfunctions.

Features

• Huge vehicle range and depth of software
• Read & Clear the error memory
• Activation, adjustments and configuration
• Resetting fault lights and electronic systems

Purchase Options

The Texa Navigator TXTs can be purchased on the following pages:

1. Agricultural Premium Package
2. Truck Premium Package
3. Fleet Premium Package

Technical Specification

• Processor: CORTEX M3 STM32F103ZG 72 MHz, FLASH 1024 KBytes, SRAM 96 KBytes
• SRAM memory: 8 MBits organized 512 KBytes x 16 bits
• NAND Flash memory: 1 GBit on 8-bit bus
• Vehicle battery: 12 VDC and 24 VDC systems' management
• External power supply: 8 ÷ 32 V
• USB communication: virtual RS232 via USB 2.0 Device
• Wireless connection: Bluetooth class1 (30 m)
• Electronic switch: 2-way, 13 independent positions
• Diagnostic connector: DSUB-26HD standard ISO 22900-1
• Control unit reprogramming connector: PV as required by the SAE J2534 protocol
• Supported protocols:
  • Blink codes
  • K, L (with current protection 100 mA), ISO9141-2, ISO14230;
  • CAN ISO11898-2, ISO11898-3
  • SAE J1850 PWM
  • SAE J1850 VPW
  • SAE J2534-1 *
• Power supply connector: 4-pin power mini-din
• Visible warnings: 1 green LED, 1 red LED, 1 blue LED
• 12 V consumption: 0.25 A typical
• 24V consumption: 0.18 A typical
• Operating temperature: 0 ÷ 50 °C
• Stocking temperature: – 20 ÷ 60 °C
• Operating moisture: 10% ÷ 80% without condensation
• Dimensions: 160x170x55 mm
• Weight: 2 kg
• Regulations:
  • Directive: 1999/5/EC
  • Safety: EN 60950
  • Electromagnetic compatibility: EN 55022, EN 55024, EN 301 489-1
  • Radio systems: EN 301 489-17, EN 300 328-2

Texa Laser Examiner

The Laser Examiner is a small practical tool to objectively measure brake disk wear with an accuracy of a tenth of a millimetre without having to remove the wheel from the vehicle. You can also measure tire tread wear using a simple adapter.

This tool integrates perfectly with the TXT.

Texa Laser Caliper to Measure Disk Wear and Tyre Tread

Safety and comfort while driving are ever more important and essential for drivers. The tests to be carried out regularly include checking the conditions of the wheel system.

Laser Examiner is a small practical tool to objectively measure brake disk wear with an accuracy of a tenth of a millimetre without having to remove the wheel from the vehicle. You can also measure tire tread wear using a simple adapter.

Laser Examiner makes performing these tests quick and simple, providing customers with a detailed report on the “health” of their vehicle's wheels, guaranteeing a professional service and contributing to customer retention. Genuine added value for garages and tire fitters and an important contribution to vehicle road safety.

Brake Disc Wear Measurement

Laser Examiner makes checking brake disk wear simple and quick, without having to remove the wheel. Thanks to the magnet incorporated in the probe, all you need do is put it on the disk.

When you press the button, it projects a laser beam transversally across the disk. A further click captures an image which is analyzed by a micro-camera.

Laser Examiner processes measurements in real time and compares them with the predefined minimum value. Comparison is both numerical and visual, and provides the mechanic with an instant assessment.

Ergonomic Design

With its elongated “stem” shape and ergonomic handgrip, the Laser Examiner is designed for easy use, even when the particularly shape of the alloy or iron rim makes the brake disk difficult to reach.

Tire Tread Wear Measurements

Tire tread wear also needs checking regularly.

A reduced tread increases vehicle instability, makes the tire vulnerable to damage and can cause the driver to lose control in the rain due to aquaplaning.

Laser Examiner has a special magnetic head allowing it to rapidly measure the depth of tread left. Once positioned on the tire, it projects a laser beam over the surface to provide an objective measurement.

Shipment Note:

If your package shipped by Express Delivery, please give us a valid delivery details like your complecte name, company name, phone number, and also a full and accurate shipping address.

Contact us:
Our office hours:
Am8: 30-PM11: 00

Contact Information.
Live Support : Chat with us online

Email: germany@makobdii.com | sales@makobdii.com
Skype: MAK-OBDii_Shop